Iwatsu EX-816

Manufacturer: Iwatsu
Model: EX-816
Connection Type:
Technicial Needed: No
Extra Part Needed: No

Connectivity Instructions

INSTALATION

1.CONNECT THE OUTPUT FROM THE MOH SOURCE TO THE GREEN AND YELLOW WIRES OF A MODULAR JACK.

2.PLUG THE OUTPUT FROM THE MODULAR JACK INTO THE EXCN MODULAR JACK ON THE IX-CPU16M CARD USING AN INDUSRTY STANDARD BASE CORD AS IN FIG 4

3.CONNECT THE OUTPUT FROM THE SOURCE CONTROL RELAY TO HTE GREEN AND BLACK (MAKE CONTACT) OR GREEN AND RED (BREAK CONTACT) WIRES OF A SECOND MODULAR JACK

4.PLUG THE OUTPUT FROM THE MODULAR JACK INTO THE RCN MODULAR JACK ON THE IX-CPU16M CARD.

NOTE:THE MOH CONTACTS ON THE RCN ARE NORMALLY OPEN. THE CONTACTS CLOSE WHEN A CO LINE IS PLACED.

EXTERNAL MOH THROUGHT THE IX-HWCL/IX-HWCE

1.CONNECT THE OUTPUT OF THE CUSTOMER PROVIDED MUSIC SOURSE TO THE MOH JACK ON THE IX-HWCL OR IX-HWCE CARD AS ILLISTRATED IN FIGURE 2.

2.WIRE THE MOH SOURCE CONTROL TO SCREW TERMINALS MTM/MTC ON THE IX-HWCL EXTERNAL MOH CONNECTION THROUGH THE IX-MISC/IS-EDCTU

1.CONNECT THE OUTPUT TERMINAL FROM THE MOH SOURCE TO THE MOH TERMINAL LOCATED ON THE IX-EDCTU DISTRIBUTION PANEL

2.THE MOH AMPLIFIER ISoSWITCHED ON AND OFF VIA CONTROL RELAY . CONNECT THE MOH AMPLIFIER CONTROL RELAY TO THROUGH THE MOH C+/SCREW TERMINAL BUS ON THE IX-EDCTU.


Back to Phone System Compatibility Database
^ Back to Top